The question everyone asks before buying a uPVC door is a simple one — how much does it actually cost?
The honest answer: uPVC doors price in India varies more than most people expect. The type of door, the profile quality, the hardware, the glass — all of it moves the number. And if you go in without a baseline, you’ll either overpay or buy something that doesn’t perform.
This guide gives you a clear, current picture of what these doors actually cost across every major type — sliding, bathroom, glass, and framed. No vague ranges, no filler. Just what you need to make a confident purchase in 2026.
uPVC Doors Price Today (Overview)
uPVC doors have largely replaced wood and aluminium in modern Indian homes — and for good reason. They don’t rot, don’t warp, don’t need painting, and hold up through monsoon seasons, coastal humidity, and north Indian summers without complaint.
The uPVC doors price in India today starts around ₹8,000 for basic interior variants and goes well past ₹60,000 for premium configurations with double-glazed glass panels and multi-point locking systems.
What pushes the cost up is usually the glass type, the profile grade, and the locking hardware. What pulls it down — often too far — is cutting corners on the uPVC profile itself. That’s where most buyers regret the decision two years in.
uPVC Doors Price List (Type-wise)
Here’s a realistic uPVC doors price list for 2026, covering the most commonly purchased door types in India. These are market-average ranges — final pricing depends on size, profile brand, and fabricator.
| Door Type |
Price Range (Per Unit) |
Best Application |
| uPVC Bathroom Door |
₹8,000 – ₹18,000 |
Bathrooms, utility rooms |
| uPVC Sliding Door |
₹18,000 – ₹55,000 |
Balconies, living rooms |
| uPVC Glass Door |
₹20,000 – ₹65,000 |
Entrances, partitions |
| uPVC Casement Door |
₹12,000 – ₹30,000 |
Bedrooms, side entries |
| uPVC French Door |
₹25,000 – ₹70,000 |
Living rooms, garden access |
| uPVC Door Frame |
₹1,500 – ₹4,500 |
All door installations |
Standard door size is 7 ft x 3 ft. Larger openings increase cost proportionally. Always confirm whether hardware and installation are included in the quoted price — they often aren’t.
Types of uPVC Doors & Prices
1. uPVC Sliding Door Price
uPVC sliding door price in India typically falls between ₹18,000 and ₹55,000 per unit.
The range is wide because sliding doors come in significantly different configurations. A two-panel sliding door for a standard balcony sits at the lower end. A three or four-panel system with toughened glass, mesh screens, and multi-point locks sits considerably higher.
What drives the uPVC sliding door price most is the glass. Single-glazed panels are cheaper. Double-glazed units with thermal break insulation can cost 30–40% more — but they reduce heat and noise in ways single-glazed panels simply can’t match.
For balcony-facing rooms, double-glazed sliding doors are worth the premium. For interior partitions, single-glazed works fine.
2. uPVC Bathroom Doors Price
uPVC bathroom doors price is the most accessible entry point in the uPVC category — typically ₹8,000 to ₹18,000 per unit installed.
These doors are built for one thing: moisture. A bathroom sees steam, standing water, and humidity every single day. Wooden doors swell and rot. Aluminium frames corrode near the hinges. uPVC doesn’t do either.
Most uPVC bathroom doors price quotes you’ll see include a solid or frosted panel — no glass — which keeps costs lower than other variants. The profile thickness and quality of the weather seal around the frame are the two things worth paying attention to at this price point.
3. uPVC Glass Door Price
uPVC glass door price starts around ₹20,000 and can cross ₹65,000 depending on the glass type and door configuration.
The glass specification matters enormously here. Clear single glass is the cheapest option. Toughened safety glass, frosted privacy glass, laminated glass, and double-glazed insulating units all sit at different price points. For main entrances and street-facing doors, toughened glass isn’t optional — it’s a safety requirement.
Hardware also shifts the uPVC glass door price significantly. Multi-point locking systems — where the door locks at three or more points simultaneously — cost more than a standard single-point lock but offer meaningfully better security.
uPVC Door Frame Prices
The frame is the part most people underestimate — and underspend on.
uPVC door frame prices typically range from ₹1,500 to ₹4,500 per frame, depending on profile width, wall thickness, and whether reinforcement inserts are included.
A uPVC door is only as good as the frame holding it. A weak or poorly installed frame flexes over time, breaks the weather seal, and allows moisture ingress at the edges. The door itself can be excellent — a bad frame will undercut all of it within a few years.
Look for frames with steel reinforcement inserts, especially for external doors that face wind pressure and daily temperature cycles. uPVC door frame prices are a small part of the total project cost, and skimping here is rarely worth it.
Factors Affecting uPVC Doors Price
Knowing the factors that influence the quotation will help you understand the quotes better.
Grade of profile — This is the most important factor. Premium quality profiles made by brands such as Duron uPVC employ advanced compounds engineered for Indian weather conditions with regard to UV resistance, thermal stability, and exact measurements regardless of temperatures. Cheaper profiles rely on poor quality materials which get discolored after several years.
Type of glass used — Single-pane, double-pane, toughened glass, laminated glass, or frosted glass. The higher the glass quality, the greater its insulation, security, and noise-reducing properties, although higher in cost.
Size of the door — Large doors, multi-pane doors, or customized dimensions increase the costs of production.
Quality of hardware used — Handles, locks, hinges, and weather seals make a significant difference in terms of quality and cost. Multi-point lock hardware is far more expensive than regular single-point locks; however, it also offers superior security.
Is uPVC Worth the Price?
Compare the lifetime cost honestly.
A solid wood door costs less upfront but needs repainting every 3–5 years, swells during monsoon, and is vulnerable to termites. A decent wooden door-plus-maintenance cost over 15 years often exceeds what a uPVC door costs once installed.
uPVC requires nothing after installation. Wipe it down occasionally. The profile won’t rust, warp, rot, or need polish. A good quality uPVC door — from a profile manufacturer with proper material standards — runs 25+ years without structural issues.
The uPVC doors price isn’t a cost. It’s a long-term investment that pays back through zero maintenance, lower energy bills from better insulation, and a door that doesn’t become a problem a few years in.